Mobile Dehumidifier PumpIt 50l Wi-Fi
- Dehumidifying up to 50 l/day, Water Tank 7.1 l
- Equipped with Pump for Pushing Water Up to Height of 5 m
- 3 Speeds / 3 Modes: Continous / Target Humidity / Comfort
- UV-C Sterilization Function & Carbon HEPA H13 Filter
- Sencor HOME App Control (iOS & Android)
Excessive humidity can cause a lot of mischief. And sometimes there's no other way to do it; to have a mould-free home, to protect your furnishings and, most importantly, the health of your household members, you need to get the humidity under control. This is exactly the task for our smart mobile dehumidifier with a capacity of up to 50 litres per day and controllable from your mobile phone with the Sencor HOME app.
50 litres of water per day – just set the target desired humidity between 35–80 % or continuous dehumidification. It collects water in a 7l watertank, or you can use the included drain hose to discharge it straight into the waste. If you can't drain the water straight away, you don't have to worry about the watertank overflowing. The dehumidifier keeps track of everything and shares everything important with the control panel on your smartphone. This way, you can always know what the current humidity level is in the dehumidified room, what mode is on and, most importantly, whether the unit is dehumidifying or if the tank is already full.
The quiet helper (only 49 decibels at high power) does a lot of useful work. It can also help with drying laundry. It will always be under your full control and will comprehensively take care of excessive humidity in spaces of 38–107 m2.
With the pump, you can also take the water up high
Sometimes there can be a problem with the drainage of the extracted water. In the basement, for example. But our dehumidifier can handle that too. Simply connect a 5 metre pressure hose to the pressure release valve with an adapter and press the PUMP button. The dehumidifier pushes the water up to a height of 5 metres. And the cellar is dry.
Required Humidity Level
This is the basic mode of operation of the dehumidifier – set the desired humidity level. Adjustment is easy and can be set between 35–80% in 5% increments.Continuous Dehumidification
The task is clear: to remove maximum moisture from the air in the room. Then set “Continuous dehumidification”.Tip for Proper Drying
Always dehumidify in a closed room. Limit ventilation in the room during the drying process, because if new air flows into the room it will bring additional moisture. Do not place the dehumidifier close to the wall to allow air to flow. Ideally, point it towards the source of moisture (wall, clothes dryer...). The efficiency of dehumidification increases with temperature, the device will work in lower plus temperatures, but the results will be better at conventional room temperature.Constantly under Control
The unit operates in a temperature range of 5–32 °C, so you don't have to worry about using it in cold temperatures. It is protected against freezing by an automatic defrost function. The dehumidifier keeps track of the current exact humidity so it knows in time that the work is done. And you can easily tell if it's getting close to your goal – it displays the current humidity on its front panel. The full tank indication will let you know that it might still want to work but has no more room. If the power goes out, it continues in the selected mode when it starts up.Sencor HOME – Simple Control on Your Smartphone
We have really taken care to make it easy and convenient to control from your phone. And that includes the first experience. Our dehumidifier is equipped with a combined Wi-Fi and Bluetooth chip. Once you add the dehumidifier to your home network, Wi-Fi is used to make the device accessible to you (just you and your loved ones) from virtually anywhere. Bluetooth makes sure that the first connection and installation of the control panel into the Sencor HOME app is easy and hassle-free. Long press the Timer button on the device to start pairing and the dehumidifier will automatically be offered to you in the Sencor HOME application.Functions and Features
- Dehumidification Capacity 50 l/day
- 50 l/day (30 °C / RH=80 %)
- 28 l/day (27 °C / RH=60 %)
- Sencor HOME App Control
- for iOS and Android
- used combined Wi-Fi and BT chip for easy installation
- Dehumidification Settings: 35-80 % / Continuous
- 3 Modes: Continous / Target Humidity / Comfort
- 3 Fan Speeds: High / Mid / Low
- Timer: 0-24 hours
- Accurate Humidity Indication
- Full Tank Indicator
- Auto Defrost Function
- Auto Restart Function
- Removable and Replaceable Filter
- Handles and Wheels for Easy Manipulation
- Accessories: 1m Drain Pipe & 5m Pump Hose with Adapter, Carbon HEPA H13 Filter
- Quiet Operation – Noise Level only 45-49 dB(A)